Apply command deslects files/folder

You have encountered a problem using Far Manager? Here you can get help.
Post Reply
KlepetoX
Posts: 129
Joined: Sun 08 Jan, 2012 08:23
Location: Czech Republic
Has thanked: 2 times
Been thanked: 1 time

Apply command deslects files/folder

Post by KlepetoX »

Why Apply command (Ctrl+G) deselects selected files on panel? Is there any possibility to left files selected after this command is executed?
User avatar
John Doe
Бюрократ
Posts: 13807
Joined: Wed 27 Apr, 2005 20:42
Has thanked: 73 times
Been thanked: 426 times
Contact:

Apply command deslects files/folder

Post by John Doe »

Use CtrlM to restore selection
KlepetoX
Posts: 129
Joined: Sun 08 Jan, 2012 08:23
Location: Czech Republic
Has thanked: 2 times
Been thanked: 1 time

Apply command deslects files/folder

Post by KlepetoX »

Yes, of course, this works. Thanks...
But still I think, that Apply command shouldn't do this.
pepak
Posts: 604
Joined: Sun 13 Jul, 2008 11:18
Has thanked: 17 times
Been thanked: 54 times

Apply command deslects files/folder

Post by pepak »

Why not? It's consistent with FAR's behavior everywhere else, e.g. after Copy...
KlepetoX
Posts: 129
Joined: Sun 08 Jan, 2012 08:23
Location: Czech Republic
Has thanked: 2 times
Been thanked: 1 time

Apply command deslects files/folder

Post by KlepetoX »

Pepak: you're right, but if you use Apply command with macros and you need to work with selected files further, it is very annoying. FAR Manager stopped developing for common users and if you need any other functionality, you need your own macros or plugins. But there's no need to spend any time on this topic. CtrlM is solution.
Post Reply

Return to “Support and Troubleshooting”