FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard layout)

Here you can report bugs found in Far Manager.
Post Reply
bOOT
Posts: 3
Joined: Thu 13 Sep, 2012 18:55

FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard layout)

Post by bOOT » Thu 13 Sep, 2012 19:07

When I use a Czech keyboard layout QWERTY, I cannot write letters with "ˇ" above characters, like Č, Ď, Ě, Ň, Ř, Š, Ť, Ž. Instead of function of dead character "ˇ" (i.e. shows nothing and waiting for next key pressed) a "+" letter is displayed.

2useven10
Posts: 3045
Joined: Mon 07 Sep, 2009 10:40
Has thanked: 2 times
Been thanked: 84 times

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by 2useven10 » Thu 13 Sep, 2012 19:28

similar issue (Slovak)
add:
What is display language ?
If English - Is switch language trick Czech/English can help ?

User avatar
HaRT
Moderator
Posts: 8118
Joined: Tue 30 Aug, 2005 17:21
Location: Санкт-Петербург
Has thanked: 68 times
Been thanked: 107 times

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by HaRT » Thu 13 Sep, 2012 20:47

2useven10
Does FAR UI localization language affect text input? 8-|
Фар есть инструмент, а не нянька. © 2009 DrKnS

2useven10
Posts: 3045
Joined: Mon 07 Sep, 2009 10:40
Has thanked: 2 times
Been thanked: 84 times

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by 2useven10 » Thu 13 Sep, 2012 20:54

Not yet. Of course I mean windows display language switch :)

bOOT
Posts: 3
Joined: Thu 13 Sep, 2012 18:55

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by bOOT » Tue 18 Sep, 2012 19:01

I have English version only without any language pack. The problem happens only with "Czech (QWERTY)" layout. With "Czech" keyboard layout it works (but this kind of layout has not only swapped Z and Y but also different shortcuts for entering English characters not presented on Czech keyboard layout).

bOOT
Posts: 3
Joined: Thu 13 Sep, 2012 18:55

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by bOOT » Tue 18 Sep, 2012 19:04

2useven10 wrote:Not yet. Of course I mean windows display language switch :)
This switch simple sets keyboard layout to "Czech". If you then set the layout to "Czech (QWERTY)" the problem is there again.

2useven10
Posts: 3045
Joined: Mon 07 Sep, 2009 10:40
Has thanked: 2 times
Been thanked: 84 times

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by 2useven10 » Tue 18 Sep, 2012 19:13

Yes. I can repeat that.
Sorry. I was inattentive (missed QWERTY layout).

2useven10
Posts: 3045
Joined: Mon 07 Sep, 2009 10:40
Has thanked: 2 times
Been thanked: 84 times

Re: FAR 3.0 - Dead-key "ˇ" doesn't works (Czech keyboard lay

Post by 2useven10 » Wed 19 Sep, 2012 10:44

2809

Post Reply

Return to “Bug Reports”