NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
- Michael Lukashov
- Posts: 517
- Joined: Mon 23 Jan, 2006 09:38
- Has thanked: 6 times
- Been thanked: 21 times
- Contact:
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Latest post of the previous page:
In the latest version of NetBox (2.1.10.147, FAR3 x86, Win Vista 32) there is a problem with editing 2 files with the same name.eg.:
I have the file test.php on local filesystem, and on remote scp in /1/test.php and /2/test.php
1. I open for editing /1/test.php
2. I can open for editing local 1.php
3. If I try to open /2/test.php I get an error:
Copying files from remote side failed.
System Error. Code: 32.
The process cannot access the file because it is being used by another process
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
A great plugin - I use it daily to download big files on Win7, FAR2. Unfortunately, when downloading a few of them when they are more than 100 MB in size, I consistently get a disconnect in between the files. This doesn't happen when I download a bunch of smaller files.
My FTP (Synology box) is behind a router, so I have to use PASV mode with it. . It starts with a resume, but the same issue happens when I start a fresh set of files.
Thank you very much for looking into this.
My FTP (Synology box) is behind a router, so I have to use PASV mode with it. . It starts with a resume, but the same issue happens when I start a fresh set of files.
Thank you very much for looking into this.
Last edited by far_gg on Thu 01 Jan, 1970 01:00, edited 0 times in total.
Reason: Fixed log formatting
Reason: Fixed log formatting
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Follow up on my earlier post. After more experimentation, I am seeing the same sort of disconnects between transfers over FAR's built-in FTP as well. Looks like trouble on Synology NAS side.
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
There are a couple of bugs regarding editing files. I made the following image to illustrate:
Are they known by the developers and if so are they going to be resolved?
Thank you
Are they known by the developers and if so are they going to be resolved?
Thank you
- John Doe
- Бюрократ
- Posts: 13861
- Joined: Wed 27 Apr, 2005 20:42
- Has thanked: 74 times
- Been thanked: 428 times
- Contact:
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
All this topic is about NetBox.
You should look here: http://code.google.com/p/conemu-maximus ... ssues?tm=3
You should look here: http://code.google.com/p/conemu-maximus ... ssues?tm=3
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
I don't know about the "100% Copying" bug, but the second is clearly a NetBox problem. Probably it assigns a random filename to the edited file so if you edit 2 files with the same name they don't get overwritten. While technically it seems to work ok, seeing in the ConEmu tab bar and Screen switcher (F12) filenames like 923RJ4R24J924J9D24.php is not very good.
I was thinking they could name the temporary files
or at least
so I can see what files I'm editing.
Regards
I was thinking they could name the temporary files
Code: Select all
"923RJ4R24J924J9D24/file.php"
Code: Select all
"file.php [lots of spaces ] 923RJ4R24J924J9D24.php"
Regards
- Michael Lukashov
- Posts: 517
- Joined: Mon 23 Jan, 2006 09:38
- Has thanked: 6 times
- Been thanked: 21 times
- Contact:
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
I cannot see "100% Copying" bug with latest ConEmu and Far2.
Filenames issue is fixed in 2.1.26, you can try it.
Filenames issue is fixed in 2.1.26, you can try it.
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
I stumbled upon another small bug - I don't know if it's a Renewal bug or something on your end:
I updated manually and everything works fine. Thanks for the fix.
As for the "100% copying" bug here are the steps to reproduce it on my machine:
- I have a SFTP server (with the default options for the session)
- The only options in NetBox I've changed are:
- I open a remote text file in the editor
- I hit F2 to save, the file is saved
- after uploading is finished the title of the tab with the panel from which I opened the file is (100% Copying)
- if I press F12 to see the list of the screens, the name of the screen is correct however (so it could be a ConEmu problem - I'm not sure)
- if I switch to the panel tab, the name of the tab is corrected
Edit: replaced the image
Code: Select all
╔═════════════════ Renewal (autoupdate) ═════════════════╗
║ Far Manager 3.0.0.3219 → 3.0.0.3219 ║
║ Disk menu 3.10.0.2841 → 3.10.0.2841 ║
║ FarColorer 1.0.3.12 → 1.0.3.12 ║
║ NetBox 2.1.25.216 → 2.1.19 ║
║ Renewal 3.15.0.2841 → 3.15.0.2841 ║
╟────────────────────────────────────────────────────────╢
║ Far Manager: [ HomePage ] [ ChangeLog ] ║
╟────────────────────────────────────────────────────────╢
║ { Check } [ Install ] [ Close ] ║
╚════════════════════════════════════════════════════════╝
As for the "100% copying" bug here are the steps to reproduce it on my machine:
- I have a SFTP server (with the default options for the session)
- The only options in NetBox I've changed are:
Code: Select all
[x] Allow more than one edited file
[x] Upload after every save
- I hit F2 to save, the file is saved
- after uploading is finished the title of the tab with the panel from which I opened the file is (100% Copying)
- if I press F12 to see the list of the screens, the name of the screen is correct however (so it could be a ConEmu problem - I'm not sure)
- if I switch to the panel tab, the name of the tab is corrected
Edit: replaced the image
- HaRT
- Moderator
- Posts: 10866
- Joined: Tue 30 Aug, 2005 17:21
- Has thanked: 221 times
- Been thanked: 358 times
pandronic
Next time, instead of an image, use the AltIns key to grab text from FAR window and the
Next time, instead of an image, use the AltIns key to grab text from FAR window and the
Code: Select all
[/b] tag to publish it here
Фар есть инструмент, а не нянька. © 2009 DrKnS
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Hi, just a heads-up: In msvc2012 / windows platform sdk 8.0 ShObjIdl.h there is a new enum PBM_PLAY_STATE with member PS_PAUSED.
This conflicts with the identically named entry in your PluginSDK/Far*/plugin.hpp. I suggest updating your old far api files.
This conflicts with the identically named entry in your PluginSDK/Far*/plugin.hpp. I suggest updating your old far api files.
Code: Select all
drkns 02.03.2012 13:58:31 +0200 - build 2515
2. Microsoft has played a dirty trick by adding PS_PAUSED to shobjidl.h, so constants form PROGRESSTATE have TBPS_ prefix now.
-
- Posts: 129
- Joined: Sun 08 Jan, 2012 08:23
- Location: Czech Republic
- Has thanked: 2 times
- Been thanked: 1 time
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
I confirm the same problem as Darkman (http://forum.farmanager.com/viewtopic.p ... 30#p112155), when I copy large files (even small files with slow connection) there's always error at the end. I must use old Ansi FTP plugin. But there are other bugs - I can't see and set attributes on Filezilla based FTP servers (old FTP plugin can) - the same bug is in WinSCP. And last - time on files after copy on FTP is shifted (timezones?) by whole hours while old FTP plugin shows right time. I like this plugin but I can hardly use it
-
- Posts: 1
- Joined: Sat 05 Oct, 2013 13:42
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Is it possible to refer a netbox stored session in a cmd or macro script? I would like to write a user menu command that archives the current folder and copies it to webdav.
- HaRT
- Moderator
- Posts: 10866
- Joined: Tue 30 Aug, 2005 17:21
- Has thanked: 221 times
- Been thanked: 358 times
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
CMD — no.campingcheese wrote:Is it possible to refer a netbox stored session in a cmd or macro script?
Macro (Lua) — yes, but you'll need to simulate user commands as NetBox doesn't expose any API of its own AFAIK.
Фар есть инструмент, а не нянька. © 2009 DrKnS
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Another NetBox bug. I'm using 2.1.31 build 271 on Far 3.0 build 3525 x86
Whenever I try to move (F6) a file from the local HDD to a SFTP server, the file get copied, but the local copy is not deleted. Instead I get the message:
Needless to say that the file is not used by any process. On FTP it works fine.
Whenever I try to move (F6) a file from the local HDD to a SFTP server, the file get copied, but the local copy is not deleted. Instead I get the message:
Code: Select all
╔═════════════════════════ Error ═════════════════════════╗
║ Copying files to remote side failed. ║
╟─────────────────────────────────────────────────────────╢
║ System Error. Code: 32. ║
║ The process cannot access the file because it is being ║
║ used by another process ║
╟─────────────────────────────────────────────────────────╢
║ Ok ║
╚═════════════════════════════════════════════════════════╝
-
- Posts: 129
- Joined: Sun 08 Jan, 2012 08:23
- Location: Czech Republic
- Has thanked: 2 times
- Been thanked: 1 time
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
I have found several things, that make NetBox plugin unusable for common work.
First of all:
Cannot copy large files to FTP (on fast connection) and even small files on slow connection. I always received this error (at the end of copying with 99%):
or sometimes error as "pandronic" above that the file is used by another process at the very end of copying. Why is connection lost? It is NOT. Old plugin copies everything in a right way. And sometimes after this error, the file is copied well.
The second:
Cannot set and read attributes on Filezilla based FTP servers:
while old FTP plugin reads and writes it normally:
The third:
Every files on both sides (local/ftp) are overwritten without any warning that files already exist. It doesn't matter what is set in configuration:
My FAR version is 3695, NetBox is 2.1.31.271. Where can I search reasons of this strange behavior, it is in NetBox or on my hard disk?
And why is everything absolutely alright with old ANSI FTP plugin?
First of all:
Cannot copy large files to FTP (on fast connection) and even small files on slow connection. I always received this error (at the end of copying with 99%):
Code: Select all
╔════════════════ Error ════════════════╗
║ Lost connection. ║
║───────────────────────────────────────║
║ Timeout detected. ║
║ Copying files to remote side failed. ║
║ Accepted data connection ║
║───────────────────────────────────────║
║ Abort Reconnect (2 s) ║
╚═══════════════════════════════════════╝
The second:
Cannot set and read attributes on Filezilla based FTP servers:
Code: Select all
╔══════════════════ Attributes ══════════════════╗
║ Change file attributes for ║
║ TeamViewerQS_cs.exe ║
║────────────────────────────────────────────────║
║ Owner: ║
║ Group: ║
║───────────────── Permissions ──────────────────║
║ Owner [ ] R [ ] W [ ] X [ ] Set UID ║ nothing is read, nothing is set
║ Group [ ] R [ ] W [ ] X [ ] Set GID ║
║ Others [ ] R [ ] W [ ] X [ ] Sticky bit ║
║ Octal: 0000 [ None ] [ Default ] [ All ] ║
║ ║
║ ║
║ ║
║────────────────────────────────────────────────║
║ { Ok } [ Cancel ] ║
╚════════════════════════════════════════════════╝
Code: Select all
╔═══════ Set attributes ════════╗
║ R W X R W X R W X ║
║ [x][x][x] [x][ ][x] [x][ ][x] ║ everything is read and written alright
║───────────────────────────────║
║ { OK } [ Cancel ] ║
╚═══════════════════════════════╝
Every files on both sides (local/ftp) are overwritten without any warning that files already exist. It doesn't matter what is set in configuration:
Code: Select all
╔════════════════ NetBox - Confirmations ═════════════════╗
║ [ ] Overwriting of files (? = use FAR settings) ║ It doesn't matter what is here
║ [x] Opening separate shell session ║
║ [x] Transfer resuming ║
║ [x] Synchronised browsing ║
║─────────────────────────────────────────────────────────║
║ { Ok } [ Cancel ] ║
╚═════════════════════════════════════════════════════════╝
And why is everything absolutely alright with old ANSI FTP plugin?
Re: NetBox — SFTP/SCP/FTP/FTPS/WebDAV client
Did any Far/Netbox developer read this?
This really sucks. Until this is fixed, Far is unusable for me. Meanwhile, I think I'll install Far 2 with WinSCP or look at other file managers.
This really sucks. Until this is fixed, Far is unusable for me. Meanwhile, I think I'll install Far 2 with WinSCP or look at other file managers.