color files
- HaRT
- Moderator
- Posts: 10863
- Joined: Tue 30 Aug, 2005 17:21
- Has thanked: 221 times
- Been thanked: 358 times
color files
It is an extremely bad bug report, so I doubt anyone will help you until you give enough detail.
The main questions are:
1. How to reproduce what you think is an error? (In detail.)
2. What you expect as a result of the steps.
3. What you observe instead.
The main questions are:
1. How to reproduce what you think is an error? (In detail.)
2. What you expect as a result of the steps.
3. What you observe instead.
Фар есть инструмент, а не нянька. © 2009 DrKnS
- DrKnS
- Posts: 6114
- Joined: Thu 04 Aug, 2005 06:44
- Location: Kyiv
- Has thanked: 12 times
- Been thanked: 426 times
color files
I'll try to apply my telepathic powers...
peotta, some recent changes in Far might have caused that.
Please try to inspect your highlighting settings and make sure that all desired options (mask, attributes etc.) are activated: F9 - files highlighting and sort groups - F4 on every item.
peotta, some recent changes in Far might have caused that.
Please try to inspect your highlighting settings and make sure that all desired options (mask, attributes etc.) are activated: F9 - files highlighting and sort groups - F4 on every item.
- vmoskalenko
- Posts: 6
- Joined: Thu 23 Nov, 2017 17:31
color files
Hi, have the same issue.
I just download night build 3.0.5097, update my old Far and now every file and folders has equal color (dark cyan). I.e. no difference between Folder, files, executable files, etc...
When I disable files highlighting then all files and folders becomes cyan color.
In black and white mode I had the same - only one color for all files and folders.
Could you fix it?
Thanks!
I just download night build 3.0.5097, update my old Far and now every file and folders has equal color (dark cyan). I.e. no difference between Folder, files, executable files, etc...
When I disable files highlighting then all files and folders becomes cyan color.
In black and white mode I had the same - only one color for all files and folders.
Could you fix it?
Thanks!
- vmoskalenko
- Posts: 6
- Joined: Thu 23 Nov, 2017 17:31
- vmoskalenko
- Posts: 6
- Joined: Thu 23 Nov, 2017 17:31
color files
Repro steps:
- Full uninstall 3.0.5097 (MSI, x64)
- Install 3.0.5000
- Run Far. Check that file coloring is enabled. Exit far.
- Install 3.0.5097 (MSI Upgrade)
- Run Far. Check that file coloring is doesn't work as usual.
- vmoskalenko
- Posts: 6
- Joined: Thu 23 Nov, 2017 17:31
color files
Registered just to post in this topic.
to this:
- F9
- "Options"
- "Files highlighting and sort groups"
- Go through each entry
- Look at the "Attributes" section. It will be disabled (no [x] in front of it).
- If you see any options marked with [x] in the list (some entries don't), then enable the "Attributes" section.
- Hightlighting should now be working again.
- Save settings.
Code: Select all
| .............................. .... | *.*
| .............................. .... | *.*
| .............................. .... | *.*|..
| .............................. .... | ..
| .............................. .... | <exec>
| .............................. .... | <arc>
| .............................. .... | <temp>
| .............................. .... |
Code: Select all
| ....H+........................ .... | *.*
| ......S+...................... .... | *.*
| ..............D+.............. .... | *.*|..
| ..............D+.............. .... | ..
| .............................. .... | <exec>
| .............................. .... | <arc>
| .............................. .... | <temp>
| ..............D+.............. .... |
color files
У меня такое-же г. случилось с цветами файлов и папок после установки 5300 и 5315 в отдельные от ранее установленной версии папки. Как хорошо что я решил не ставить поверх нормальной рабочей 3535. Теперь все папки и файлы одного цвета. Никакие игры с включением выключением аттрибутов не помогли, пришлось вкучную выставлять аттрибуты для всех типов - хорошо что было куда смотреть - 3535 работает как надо. Дичь какая-то, пока 5+ придется отправить в мусорку.
color files
+1
file highlightning is totally disabled after installing of 5300.
trying to find earlier build
file highlightning is totally disabled after installing of 5300.
trying to find earlier build
color files
I fixed in in a strange way:
At first I did the attributes filter as mentioned above. Nothing changed.
Then I set the "continue processing" checkbox -- everything went fine. Then I unset it back and now and seems to work as expected
color files
it is fixed at nightly build (5346) (https://www.farmanager.com/nightly/Far3 ... 181228.msi)
Also I'm able to use on of previous stable build (5254) (https://www.farmanager.com/files/Far30b ... 180805.msi).
But current stable build (5300) is buggy, tested on fresh Win10.
Also I'm able to use on of previous stable build (5254) (https://www.farmanager.com/files/Far30b ... 180805.msi).
But current stable build (5300) is buggy, tested on fresh Win10.