color files

Here you can report bugs found in Far Manager.
peotta
Posts: 3
Joined: Tue 15 Nov, 2011 19:04

color files

Post by peotta »

is not showing listed files in color in Far Manager v3.0 build 5092 x86
User avatar
HaRT
Moderator
Posts: 10823
Joined: Tue 30 Aug, 2005 17:21
Has thanked: 221 times
Been thanked: 358 times

color files

Post by HaRT »

It is an extremely bad bug report, so I doubt anyone will help you until you give enough detail.
The main questions are:
1. How to reproduce what you think is an error? (In detail.)
2. What you expect as a result of the steps.
3. What you observe instead.
Фар есть инструмент, а не нянька. © 2009 DrKnS
peotta
Posts: 3
Joined: Tue 15 Nov, 2011 19:04

color files

Post by peotta »

sorry

files highlighting do not show colors
User avatar
John Doe
Бюрократ
Posts: 13807
Joined: Wed 27 Apr, 2005 20:42
Has thanked: 73 times
Been thanked: 426 times
Contact:

color files

Post by John Doe »

F9 / Options / Panel settings / [x] Highlight files
User avatar
DrKnS
Posts: 6114
Joined: Thu 04 Aug, 2005 06:44
Location: Kyiv
Has thanked: 12 times
Been thanked: 426 times

color files

Post by DrKnS »

I'll try to apply my telepathic powers...

peotta, some recent changes in Far might have caused that.
Please try to inspect your highlighting settings and make sure that all desired options (mask, attributes etc.) are activated: F9 - files highlighting and sort groups - F4 on every item.
User avatar
vmoskalenko
Posts: 6
Joined: Thu 23 Nov, 2017 17:31

color files

Post by vmoskalenko »

Hi, have the same issue.

I just download night build 3.0.5097, update my old Far and now every file and folders has equal color (dark cyan). I.e. no difference between Folder, files, executable files, etc...
When I disable files highlighting then all files and folders becomes cyan color.
In black and white mode I had the same - only one color for all files and folders.

Could you fix it?

Thanks!
User avatar
vmoskalenko
Posts: 6
Joined: Thu 23 Nov, 2017 17:31

color files

Post by vmoskalenko »

Few updates: The previous version was Far Manager x64 3.0.4747
User avatar
vmoskalenko
Posts: 6
Joined: Thu 23 Nov, 2017 17:31

color files

Post by vmoskalenko »

Repro steps:
  • Full uninstall 3.0.5097 (MSI, x64)
  • Install 3.0.5000
  • Run Far. Check that file coloring is enabled. Exit far.
  • Install 3.0.5097 (MSI Upgrade)
  • Run Far. Check that file coloring is doesn't work as usual.
User avatar
DrKnS
Posts: 6114
Joined: Thu 04 Aug, 2005 06:44
Location: Kyiv
Has thanked: 12 times
Been thanked: 426 times

color files

Post by DrKnS »

vmoskalenko, have you tried the steps above?
User avatar
vmoskalenko
Posts: 6
Joined: Thu 23 Nov, 2017 17:31

color files

Post by vmoskalenko »

DrKnS wrote: Thu 23 Nov, 2017 21:04have you tried the steps above?
Yes. I did.
vvardja
Posts: 1
Joined: Fri 24 Nov, 2017 12:01
Been thanked: 1 time

color files

Post by vvardja »

Registered just to post in this topic.
  • F9
  • "Options"
  • "Files highlighting and sort groups"
  • Go through each entry
    • Look at the "Attributes" section. It will be disabled (no [x] in front of it).
    • If you see any options marked with [x] in the list (some entries don't), then enable the "Attributes" section.
  • Hightlighting should now be working again.
  • Save settings.
With the default highlighting settings you should go from this:

Code: Select all

| .............................. .... | *.*
| .............................. .... | *.*
| .............................. .... | *.*|..
| .............................. .... | ..
| .............................. .... | <exec>
| .............................. .... | <arc>
| .............................. .... | <temp>
| .............................. .... |
to this:

Code: Select all

| ....H+........................ .... | *.*
| ......S+...................... .... | *.*
| ..............D+.............. .... | *.*|..
| ..............D+.............. .... | ..
| .............................. .... | <exec>
| .............................. .... | <arc>
| .............................. .... | <temp>
| ..............D+.............. .... |
phantom4
Posts: 18
Joined: Tue 20 Sep, 2005 14:30
Has thanked: 2 times
Contact:

color files

Post by phantom4 »

У меня такое-же г. случилось с цветами файлов и папок после установки 5300 и 5315 в отдельные от ранее установленной версии папки. Как хорошо что я решил не ставить поверх нормальной рабочей 3535. Теперь все папки и файлы одного цвета. Никакие игры с включением выключением аттрибутов не помогли, пришлось вкучную выставлять аттрибуты для всех типов - хорошо что было куда смотреть - 3535 работает как надо. Дичь какая-то, пока 5+ придется отправить в мусорку.
nooker
Posts: 2
Joined: Fri 30 Nov, 2018 14:04

color files

Post by nooker »

+1
file highlightning is totally disabled after installing of 5300.
trying to find earlier build
nooker
Posts: 2
Joined: Fri 30 Nov, 2018 14:04

color files

Post by nooker »

phantom4 wrote: Thu 15 Nov, 2018 17:42 Никакие игры с включением выключением аттрибутов не помогли
I fixed in in a strange way:
At first I did the attributes filter as mentioned above. Nothing changed.
Then I set the "continue processing" checkbox -- everything went fine. Then I unset it back and now and seems to work as expected
AMG
Posts: 1
Joined: Fri 28 Dec, 2018 12:58

color files

Post by AMG »

it is fixed at nightly build (5346) (https://www.farmanager.com/nightly/Far3 ... 181228.msi)
Also I'm able to use on of previous stable build (5254) (https://www.farmanager.com/files/Far30b ... 180805.msi).
But current stable build (5300) is buggy, tested on fresh Win10.
Post Reply

Return to “Bug Reports”